Dumpmapper

Hauling & loading · · 4 min read

Keeping Dense Rubble Low

Concrete, brick, and soil should sit in a low layer, not in a tall mound. A small volume can still be too heavy, so load less than the bed can physically hold.

Tags: rubble · concrete · weight

Spread a single low layer

Rubble does not pile like brush. A layer of broken concrete a few pieces deep can be all a light truck or trailer should carry. Place pieces flat, tight to the floor, ahead of the axle, and not balanced on other debris. Do not stack rubble above the rails to finish the job in one trip. The vehicle's door sticker is the limit, and the stance of the vehicle is the visible check. If the tires look low or the hitch is buried, remove pieces. A cracked frame or a blown tire on the way to the site is not a disposal success.

Keep the pieces from becoming projectiles

A loose chunk slides and punches the bed wall when you stop. Set flat faces down. Use a strap across a stack that could shift, and a liner if dust will pour out. Do not mix a tall pile of bags on top of concrete. The bags become the thing that flies, and the concrete becomes a hammer behind them. If rebar sticks out, point it away from tires and from the cab, and cap or bend the sharp end if you can do that safely. Tell the site about rebar when you describe the load.

Unload without dropping chunks into the lane

Park where the attendant assigns inert material. Lift or slide pieces down. Do not tip an entire trailer of concrete if the latch and the pile are not set up for a dump body. A utility trailer is not a dump truck just because you want to open the gate and let gravity work. Pieces can hang up and then fall on your legs. Hand off a manageable amount, then move the vehicle if the pile needs room. If the site refuses the size of a chunk, take that chunk home. Do not break it with a sledge on the tipping floor.

Before you go

  1. Load rubble in a low layer ahead of the axle.
  2. Stop when the vehicle's stance or door-sticker limit says stop.
  3. Strap pieces that can slide and point rebar away from the tires.
  4. Unload piece by piece where inert material belongs.

Heaping broken concrete above the bed rails to avoid a second trip.

Questions people ask

Can I put rubble in cardboard boxes to make it liftable?

Only small pieces, and the box will fail if it is soaked or overloaded. A bucket you can actually lift is safer. Do not hide the weight in a huge box.

Should soil and concrete ride together?

Ask the site. They may be different rows. Even if they can, both are dense. The combined layer still has to stay low.

Search Dumpmapper by ZIP code or city, then call the site before you load the truck. Hours and accepted materials change.

Related posts