How to dispose of a wood fence starts with figuring out what the fence is made of. Many fences combine untreated cedar or pine pickets with pressure-treated posts and rails, and each goes to a different place. Posts are often set in concrete, which adds weight and a separate disposal step. With some sorting, you can recycle part of the load and avoid higher mixed-debris fees.
Know your wood
| Material | How to tell | Disposal |
|---|---|---|
| Untreated cedar or redwood | Reddish, aromatic, weathered gray | Wood recycling or C&D debris |
| Untreated pine or spruce | Pale, no stamp or tint | Wood recycling or C&D debris |
| Pressure-treated wood | Greenish or brown tint, stamped tags, staple marks | Landfill or C&D debris; never burn or mulch |
| Painted or stained wood | Coated surface | Usually C&D debris; older paint may contain lead |
Older pressure-treated lumber, made before about 2004 for residential use, may contain chromated copper arsenate. Never burn treated wood or use it for mulch or compost. See pressure-treated wood disposal.
Taking the fence down
- Call 811 before digging around posts to avoid buried utilities.
- Remove gates and hardware first.
- Pull pickets from rails with a pry bar or cut them off.
- Cut rails from posts with a reciprocating saw.
- Remove posts: rock them loose, use a post puller or jack, or cut them flush with the ground if allowed.
Concrete footings
Post footings can weigh 50 pounds or more each. Options:
- Break the concrete off the post with a sledgehammer and take the concrete to a site that accepts clean concrete or rubble. See the concrete disposal guide.
- Haul whole post-and-footing pieces to a C&D site that accepts mixed loads.
- Leave footings in place below grade if you are not reusing the holes and local rules allow.
Hardware and metal
Hinges, latches, brackets, and nails are scrap metal. A magnet sweeper helps collect loose nails from the yard.
Where the wood goes
- Wood recycling or yard waste sites that accept clean, untreated, unpainted lumber, often with nails allowed.
- C&D debris at transfer stations and landfills for treated and painted wood.
- Roll-off dumpsters for long fences.
- Reuse: solid cedar pickets are popular for crafts, planters, and accent walls.
Bulk curbside pickup may accept small amounts of cut-down fence; check size and quantity limits.
Cutting costs
Cut boards into consistent lengths so they stack tightly in a truck or dumpster. Separating clean wood, concrete, and metal can lower fees at sites that price by material.
How to dispose of a wood fence FAQ
Can I burn an old wooden fence?
Never burn pressure-treated or painted wood. Untreated wood rules vary by local burn ordinances.
Is fence wood recyclable?
Clean, untreated wood may be accepted at wood recycling sites. Treated wood usually goes to a landfill.
How do I get rid of fence posts with concrete?
Break off the concrete for a concrete recycler, or haul post-and-footing pieces to a C&D site.
Will garbage pickup take an old fence?
Some bulk pickup programs take small, cut-down amounts. Check your city’s limits.
How can I tell if fence wood is pressure-treated?
Look for a green or brown tint, stamped tags, or staple holes from removed tags.
The bottom line
How to dispose of a wood fence: call 811, take it down in order, separate untreated wood from pressure-treated and painted wood, break out or haul footings as concrete, scrap the hardware, and send treated wood to a landfill or C&D site. Never burn treated lumber.
Guides and tools
Concrete disposal guide · Dump cost calculator · All material guides