Dumpmapper

Disposing of specific items · · 4 min read

How to Dispose of a Truck Cap or Camper Shell

How to dispose of a truck cap: sell it to someone with the same truck, or strip glass and hardware, take fiberglass to bulky waste, and scrap aluminum.

How to dispose of a truck cap starts with trying to sell it, because caps fit specific truck beds and buyers with the same truck often want one. Fiberglass caps, aluminum caps, and soft toppers each go to different places if no one wants them. Aluminum caps are scrap metal. Fiberglass shells are bulky waste, since fiberglass is rarely recycled. Remove glass windows, hardware, wiring, and seals first.

Sell or give away

DetailWhy it matters
Truck make and modelCaps fit specific beds
Bed lengthShort, standard, or long
Model yearsBed shape changes between generations
ConditionSeals, locks, windows, and paint

List measurements and the truck it came off. Truck accessory shops sometimes buy used caps.

Removing a truck cap

  1. Unplug the third brake light wiring.
  2. Loosen and remove clamps.
  3. Lift with four people or a hoist; caps weigh about 150 to 250 pounds.
  4. Set it on sawhorses or padded blocks.

Materials and disposal

PartMaterialDisposal
ShellFiberglassBulky waste or transfer station
ShellAluminumScrap metal
WindowsTempered glassTrash or flat glass bin
HardwareSteel or aluminumScrap metal
Brake light, wiringElectronicsE-waste or scrap wire
Seals, carpet liningRubber, fabricTrash

See disposing of old windows for glass handling.

Fiberglass disposal

Fiberglass caps are bulky. Some transfer stations accept them whole for a fee. Cutting a fiberglass cap into pieces releases glass fibers and dust; if you cut it, wear a respirator, eye protection, gloves, and long sleeves, and work outdoors.

Aluminum caps and soft toppers

Aluminum caps are lighter and scrap well once windows and plastic are removed. Soft or canvas toppers have aluminum frames to scrap and fabric to trash.

Reuse ideas

Old caps have been turned into trailer tops, garden sheds, chicken coops, and storage boxes.

Tonneau covers

Tonneau covers are aluminum, vinyl, or fiberglass. Sell them or separate metal for scrap. See how to dispose of old car parts.

Finding a buyer faster

Used caps sell best when the listing includes the bed length to the inch, the truck years it fits, and photos of the seals, latches, and inside. Mention whether keys are included and whether the third brake light works. Pricing a little below local averages moves a cap quickly, since buyers must also find a way to haul and install it. Local cap dealers sometimes take trade-ins or keep a list of customers looking for specific used models.

Storing a cap before sale

Store a removed cap on its rails, supported on sawhorses or padded blocks, rather than on its roof or face, which can crack fiberglass or bend aluminum. Cover it with a tarp to protect seals from sun.

How to dispose of a truck cap FAQ

Can I sell a used truck cap?

Yes, especially to owners of the same truck and bed size.

Is a fiberglass truck cap recyclable?

Rarely; it usually goes to bulky waste.

How much does a truck cap weigh?

Often about 150 to 250 pounds.

Are aluminum truck caps worth scrap?

Yes, once glass and plastic are removed.

Can I cut up a fiberglass cap?

Yes, with a respirator and protective gear, outdoors.

The bottom line

How to dispose of a truck cap: sell it to someone with the same truck and bed, or remove windows, hardware, and wiring, scrap aluminum caps, and take fiberglass shells to bulky waste. Use the map to find a transfer station or scrap yard near you.

Hauling it yourself? If the load won’t fit in the truck bed, a 6×10 ft open-rail utility trailer or a 4×8 ft folding trailer (it folds upright to store in a garage) can cost less than a couple of hauler trips. Tie everything down with ratchet tie-down straps; many sites charge extra for loose or uncovered loads.

Guides and tools

As an Amazon Associate, Dumpmapper earns from qualifying purchases.

Related posts