Shingle disposal in Veneta, OR is a weight problem first: a tear-off fills a trailer fast and is often priced by the ton. Short Mountain LF is the first match in our data near Veneta, and the official page below covers Creswell-area rules. With Transfer station (near Eugene) nearby, felt, flashing and nails come off with the shingles and affect sorting. On a run to Transfer station (near Eugene), older roofs can include asbestos-containing materials, which need testing. Anywhere along the Eugene side, wet shingles weigh more at a scale.
Treat the Transfer station (near Eugene) and Short Mountain LF details below as leads to confirm, not guarantees.
Shingle disposal in Veneta, OR at a glance
- Start here: Short Mountain LF.
- Also in Lane County: Transfer station (near Eugene).
- Rules and contacts: Waste Management, plus a call to Transfer station (near Eugene).
- Old roof? Test suspect materials for asbestos before tear-off (ask at Glenwood Transfer Station).
- Expect weight-based pricing for shingles at many Springfield-area sites.
Nearby sites on our map
Start with the 4 below for Veneta. Our Lane County page lists the remaining sites, and the shingle disposal guide gives context.
Short Mountain LF
On our map, Short Mountain LF shows as a landfill 18.9 miles from Veneta (straight-line) near Eugene. The listing gives 84777 Dillard Access Road, Eugene, OR 97405 as the address for this Springfield-area trip. Call Short Mountain LF for hours before leaving the East Cloverdale Road side of town; our record doesn't list them. Because EPA records (our source here) include commercial-only landfills, confirm Short Mountain LF takes Eugene-area residents.
Transfer station (near Eugene)
Transfer station (near Eugene) is a transfer station 14.3 miles from Veneta (straight-line) near Eugene. Use the pin on Transfer station (near Eugene)'s listing to plan the roofing load; we have no street address. No schedule is on file for Transfer station (near Eugene); confirm it before the drive from the area around Short Mountain LF. Confirm that the transfer station 14.3 miles out accepts shingles.
Glenwood Transfer Station
On our map, Glenwood Transfer Station shows as a transfer station 16.3 miles from Creswell or downtown (straight-line) near Springfield. For a roofing load, set your GPS to 3100 East 17th Avenue, Springfield, OR 97403. Listed schedule: Mon–Sat 8 AM–6 PM; Sun 8 AM–5 PM (verify before leaving the Dillard Access Road side of town). Phone: (541) 682-4120. Check Glenwood Transfer Station rules for tear-off debris.
Creswell Dump
Creswell Dump near Creswell is listed as a transfer station, 21.2 miles from Dexter or downtown (straight-line). Address on file for Springfield-area drivers: 34293 East Cloverdale Road, Creswell, OR 97426. Call Creswell Dump for hours before leaving anywhere between Springfield and downtown; our record doesn't list them. Ask whether Creswell Dump weighs roofing loads.
Countywide, from Short Mountain LF outward, our map holds 16 sites: 8 transfer stations, 6 recycling centers, 1 electronics drop-off, and 1 landfill.
What Waste Management says
Here is what Waste Management said about sites like Short Mountain LF when we checked in October 2026. It had nothing quotable on roofing shingles, so ask the landfill on Dillard Access Road directly.
Shingle hauling tips for Veneta
Ask the Dillard Access Road landfill whether clean asphalt shingles go to a separate pile. Shingles are heavy; don't overload a trailer past its rating on the way to the landfill 18.9 miles out. Gather flashing and drip edge separately; metal may go to scrap near East 17th Avenue.
Roofs on older Dexter-area homes may include asbestos-containing felt or shingles; test before tear-off. Around that landfill, about 18.9 miles away, A covered load avoids litter tickets in Oregon. Contractors may need an account at the landfill on Dillard Access Road; homeowners should say they're a residential load.
Planning the trip from Veneta
Call ahead to learn how the Dillard Access Road landfill prices a load like yours; methods differ from site to site. Ask whether the landfill 18.9 miles out uses a scale or a flat rate; it affects how you should plan the roofing load. Load the heaviest items last if you'll be unloading alone at that landfill, about 18.9 miles away; they come out first. Separating materials at home speeds up the stop at the landfill on Dillard Access Road, where items often go to different areas. Bring a tarp and straps for the roofing load, since an uncovered load can earn a ticket on the way to the Dillard Access Road landfill.
Call checklist for Veneta
When you call about a roofing load, ask:
- Does the landfill 18.9 miles out accept roofing shingles from homeowners?
- Are shingles priced by weight at that landfill, about 18.9 miles away?
- Are slate or tile roofs accepted for a load from the area around Glenwood Transfer Station?
- Do contractors need an account in Lane County?
Beyond the drop-off: Veneta options
- Roll-off sizing: ask Eugene-area haulers about weight limits for shingles.
- Recycler: ask the landfill on Dillard Access Road staff whether any processor takes clean shingles.
- For trips to the Dillard Access Road landfill, Asphalt math: our sister site's asphalt tonnage calculator helps estimate material weight.
FAQ: shingle disposal in Veneta
What's the closest shingle drop-off for Eugene and nearby towns?
The landfill 18.9 miles out is the first match in our data for households near Creswell Dump. Confirm it takes roofing debris.
Are shingles priced by weight around Creswell Dump?
Usually by the ton or load; ask that landfill, about 18.9 miles away.
Does Eugene-area recycle asphalt shingles?
Check with the landfill on Dillard Access Road; some sites separate clean shingles.
How accurate is the Transfer station (near Eugene) listing?
Entries like that transfer station, about 14.3 miles away may lag behind changes; check with the site directly.
Wrapping up
For roofing shingles from anywhere between Dexter and downtown, begin with the Dillard Access Road landfill, read Waste Management, and keep the Lane County map open for backups.
Hauling it yourself? If the load won’t fit in the truck bed, a 6×10 ft open-rail utility trailer or a 4×8 ft folding trailer (it folds upright to store in a garage) can cost less than a couple of hauler trips. Tie everything down with ratchet tie-down straps; many sites charge extra for loose or uncovered loads. Bag loose debris in 55-gallon contractor bags so it’s quicker to unload.
As an Amazon Associate, Dumpmapper earns from qualifying purchases.