How to dispose of a ceiling fan starts with taking it down safely and then breaking it into parts. The motor housing is mostly steel and copper, which scrap yards and electronics recyclers generally accept. Blades, glass shades, remote receivers, and bulbs each have a different best destination. A working fan in good shape can also be donated to a building reuse store.
Remove it safely
- Turn off the circuit breaker, not just the wall switch, and confirm power is off with a non-contact voltage tester.
- Remove the bulbs and glass shades first.
- Take off the blades to lighten the fan.
- Support the motor while disconnecting the wires; fans can weigh 15 to 50 pounds.
- Cap the ceiling wires with wire nuts and install the new fixture or a blank cover.
If you are not comfortable with wiring, hire an electrician.
Donate working fans
Building material reuse stores, such as Habitat for Humanity ReStores, often accept working ceiling fans with all their parts, including the mounting bracket and remote. Call ahead, since acceptance varies.
Where each part goes
| Part | Best destination |
|---|---|
| Motor and housing | Scrap metal yard or electronics recycler |
| Mounting bracket and downrod | Scrap metal |
| Remote and receiver | Electronics recycling; remove batteries |
| Wood or MDF blades | Trash, or reuse in crafts |
| Metal blades | Scrap metal |
| Plastic blades | Trash in most areas |
| Glass shades | Trash, wrapped; not container glass |
| CFL bulbs | Household hazardous waste or bulb recycling |
| LED and incandescent bulbs | Check local rules; LEDs are often accepted as electronics |
Bulbs need special care
Compact fluorescent bulbs contain a small amount of mercury and should go to a bulb recycling drop-off or household hazardous waste program. See how to dispose of light bulbs.
Scrap value
Fan motors contain copper windings, so some scrap yards accept them as electric motors, sometimes paying a bit more than for mixed steel. Remove the blades and glass before bringing the motor in.
During a remodel
If the fan is part of a larger renovation, it can go into a mixed construction debris load at many transfer stations, but separating the metal often lowers costs. See how to dispose of construction debris.
How to dispose of a ceiling fan FAQ
Can I throw a ceiling fan in the trash?
Some areas allow it, but the motor and metal parts are easily recycled at scrap yards or electronics drop-offs.
Do scrap yards take ceiling fans?
Many accept fan motors and metal parts. Remove blades and glass first.
Can I donate a used ceiling fan?
Building reuse stores often accept working fans with all parts. Call ahead.
What do I do with ceiling fan glass shades?
Wrap them and put them in the trash, or donate them if intact. They are not accepted in glass recycling.
How do I dispose of ceiling fan bulbs?
Take CFLs to a bulb recycling site. Check local rules for LEDs and incandescents.
The bottom line
How to dispose of a ceiling fan: shut off the breaker, take it down carefully, and donate it if it works. Otherwise, scrap the motor and metal parts, recycle the remote, wrap glass shades for the trash, and take CFL bulbs to a bulb recycling site.
Guides and tools
Electronics recycling guide · Fluorescent bulb guide · Dump cost calculator · All material guides