Dumpmapper

Landfills · · 4 min read

Where to Dump Construction Debris in Freeport, NY

Where to take drywall, lumber, concrete and roofing from Freeport, NY: Brooklyn C&D Transfer Station. Listed details and loading tips.

Where to dump construction debris in Freeport is a common question during a remodel, a deck tear-out or a roof job. The specialty site closest to Freeport in our data is Brooklyn C&D Transfer Station (about 19 miles), and we list several general drop-offs too. Here’s how they differ and what to know before you haul.

A quick note on the data: Dumpmapper builds its listings from public records and OpenStreetMap, and we haven’t confirmed each detail by phone. Hours, rules and prices change, so a call ahead is always a good idea.

Where to take construction and remodel debris

Brooklyn C&D Transfer Station

Brooklyn C&D Transfer Station is about 19 miles west of Freeport, in Brooklyn, and our listing describes it as a transfer station. Its listed address is 543 Varick Avenue, Brooklyn, NY 11222. We don’t have hours for it, so call before you load up. At a transfer station you usually unload onto a tipping floor or into a container rather than driving out onto a landfill.

Choosing between sites near Freeport

We don’t have hours for any of these sites, which makes calling ahead the first step.

To see every listing we have in the area, browse Kings County.

Sorting a Freeport debris load by destination

  • Concrete, brick, block, rock and dirt: an inert landfill or a concrete recycler is usually the cheapest stop; ask the sites above whether they keep a separate rubble pile. Keep it free of wood and trash.
  • Lumber, drywall, flooring and cabinets: general sites such as Brooklyn C&D Transfer Station typically take mixed remodel debris.
  • Asphalt shingles: some sites take them with mixed debris and some want them apart; see our shingle guide before you tear off a roof.
  • Scrap metal: copper pipe, aluminum and steel can go to a scrap yard instead of the landfill.
  • Job-site trash: bagged trash and packaging can go to Brooklyn C&D Transfer Station or another general drop-off.

Sorting and loading debris

  • Pull the metal. Copper, aluminum and steel can go to a scrap yard instead of the landfill.
  • Ask about drywall and shingles. Some sites take them with mixed debris, others separately, and a few not at all.
  • Know what’s banned. Asbestos, lead paint chips, liquids and hazardous products need special handling.
  • Don’t overload. Half a bed of broken concrete can already be more than a light-duty pickup should carry. Our tips on splitting an overweight load help.
  • Ask about contractor rules. Some public sites charge contractors differently or limit commercial loads.

Other ways to handle debris

If part of the job is tearing out a concrete slab or walkway, the concrete calculator on AsphaltTons can estimate the volume you’re dealing with, which helps you decide between pickup trips and a roll-off.

Reuse centers and building-material resale stores take usable doors, cabinets, fixtures and lumber.

Our guide to construction debris covers the material-by-material rules in more depth.

Concrete and asphalt recyclers sometimes accept clean loads for less than a landfill charges.

Freeport debris disposal FAQ

Where do I take remodel debris from Freeport?

In our listings, the closest is Brooklyn C&D Transfer Station in Brooklyn, about 19 miles from the center of Freeport. Confirm hours and accepted materials before you go.

Where can I dump concrete near Freeport?

Clean concrete often costs less at an inert landfill or a concrete recycler than at a general landfill. Ask the sites above whether they have a separate rubble area. Our concrete guide has more.

Can I take drywall to these sites?

Many C&D and general landfills take drywall, but some want it separated or charge differently. Ask before you load it with other debris.

Can I go on a Saturday?

We don’t have Saturday hours on file for these sites. Call ahead to ask about weekend days.

How much does it cost to dump near Freeport?

Our listings don’t include verified fees. Public sites usually price by the ton, by vehicle or load size, or per item, so ask when you call. The dump cost calculator can give you a rough estimate first.

The bottom line

For debris from a Freeport project, start with Brooklyn C&D Transfer Station (about 19 miles away). Our data doesn’t include verified prices, so ask about fees when you call, and use the map if you need more options.

Hauling it yourself? If the load won’t fit in the truck bed, a 6×10 ft open-rail utility trailer or a 4×8 ft folding trailer (it folds upright to store in a garage) can cost less than a couple of hauler trips. Tie everything down with ratchet tie-down straps; many sites charge extra for loose or uncovered loads. Bag loose debris in 55-gallon contractor bags so it’s quicker to unload.

Guides and tools

As an Amazon Associate, Dumpmapper earns from qualifying purchases.

Related posts